NB-IoT development program
The purpose of the NB-IoT developer program is to provide the developer community with a Narrow Band IoT end-to-end communication development environment. The program allows developers and partners the ability to rapidly prototype use cases before going to a production environment. The program consists of four focus areas, namely:
Hardware
Firmware
Network
Cloud
The program is intended to simplify the end-to-end communication development of Narrow Band IoT products. By using hardware that leverages the easy to use open source Arduino software, and by providing a cloud platform where data can be sent to, the initial cost and time to set up a private server is eliminated.


NB-IoT dev kit
- Hellothing NB-IoT Arduino expansion shield
- HelloThing L10 NB-IoT modem
- Arduino Uno R3
- USB Cable 2.0, Male USB A to Male USB B
- Vodacom NB-IoT SIM
- Antenna
Now that you have unboxed your development kit, you will need to set up your hardware and configure your platform. Use our bot if you get stuck. Enjoy your prototyping!
Hardware setup
- Step 01
- Step 02
- Step 03
- Step 04
- Step 05
Platform setup
- Step 01
- Step 02
- Step 03
- Step 04
- Step 05
Software setup
- Step 01
- Step 02
- Step 03
- Step 04
- Step 05
- Step 06
- Step 07
- Step 08